A Working Jailbreak for the 1.1.3 firmware is here but comes with a RISK! As all upgrades are risky, this one is doubly so. You may have to restore your iPhone using iTunes and start again if it fails. Make sure to backup first!
This jailbreak, like the 1.1.2 jailbreak, comes as an upgrade. This means you need to have a 1.1.1 or 1.1.2 jailbroken iPhone already, before you begin. Unlocked phones appear to remain unlocked and work properly after the update according to scattered reports.
MAC VERSION – Download the 1.1.3 package maker and open it, then run Run_This. Read carefully, press Enter when necessary, and the image will be uploaded to your phone.
Here’s how you do it:
– Start with a 1.1.1 or 1.1.2 jailbroken phone with Installer.app installed.
– Plug in your phone via USB to your computer.
– Download, extract, and run iBrickr Special 1.1.3 jailbreak edition (ibrickr.exe in the archive).
– iBrickr will determine what firmware you are running on your phone and make sure you can run the update.
– iBrickr will then guide you through the process of obtaining and modifying the 1.1.3 firmware (make sure to read everything thoroughly).
– iBrickr will upload the new firmware image to your phone. Note that this only puts the file on your phone and does not modify it at all, yet.
– When iBrickr finishes (should take about 10 minutes), it will tell you to go to Installer and install the “1.1.3 soft upgrade” package. Do that.
– When the installer finishes (this should take another 10-15 minutes), your phone should reboot with a fresh activated 1.1.3 firmware.
I’m Taking the Leap Right now Ill Post how it Goes!!!
How do you run Run_This?
Just Double Click
Is this only for the iphone or for the touch as well?
When i try to download the soft app it says it cannot find host
it crashes when i try to download the 1.1.3 software from installer????
is it supposed to go back to the home screen half way through the soft 1.1.3 download???
I have a 1.1.2 jailbreak and unlock with AnySim , after this upgrade to 1.1.3 , can i still using a non AT&T Sim???
i started downloading the 1.1.3 soft upgrade and the main script execution failed … Any ideas????
it worked i got it!!!!
What kind of SIM are you using?? a non-AT&T??
I’m using a tmobile sim. After I got the script error I restatted my phone and itlladed up u. 1.1.3 and I’d working great
I read from another site that if you get the “main script execution failed” error just let it run, don’t do anything just let it finish.
it all ran and I’m on 1.1.3
who can i run on a mac RUN_THIS file??
just download the run_this so and double click to open then follow instructions
Lumos… i got a message: “There is no default application specified to open the document “Run_This”.””””
What can i do?
are you using a mac or pc?
mac
use Terminal as the app to open run_this
Thanks LUMOS… i got my Iphone connected but i got the next message on TERMINAL :”Checking iPhone version…
You have iPhone version .
Sorry! You must have an iPhone 1.1.1 or 1.1.2 with Installer.app installed. Press Enter to exit.”
Mi iphone is right now charging from my mac
what firmware do u have?
1.1.2 with installer.app installed…
It should prompt u to download the 1.1.3 patch . Good luck. It took me acouple times and one restore to get it to work….
what source do I have to add to find this “1.1.3 soft upgrade? Please help
community sources should have it
Lumos can you confirm that you do not have to re-unlock your phone after the 1.1.3 upgrade? You have 1.1.3 fully working with T-Mobile USA?
i got this work with tmobile usa. the only thing is that tzone is not working anymore even with sw from installer. any ideas
what is the address for community source?
@Joe Ten: The installer source that contains the 1.1.3 soft upgrade is STE:
psmxy.org/iphone-apps/
I’m on Tmobile US and upgraded to 1.1.3 from 1.1.1 and the jailbreak went fine and the phone remained unlocked but there were a bunch of little problems (EDGE settings need fixing, lot of Installer apps aren’t compatible yet, etc).
Also here’s another big warning: if you upgrade to 1.1.3 and then sync with iTunes at any point, you can no longer restore your data to anything lower than firmware 1.1.3 (if you downgrade back to 1.1.1 as I have, iTunes will tell you that the restore isn’t compatible with the version of iPhone).
Anyone tried this with a T-mobile UK sim? is the iphone still unlocked?
Cheers
Thanks Jon Davis,
I was able to get the upgrade to work.
I am live in canada and use Fido/Rogers and my service is still working fine after the upgrade.
How ever I did lose all of my installed program icons.
I installed the upgrade 1.1.3 from ibrickr and everything went great but the all of my icons dissappeared and i tried to uninstall the 3rd party apps and re-install them to get the icons back which most of them did but my Summerboard icon (SMB) won’t come back and it won’t uninstall also i tried to reinstall Customize but it says after i download it that it is only for 1.1.1 or 1.1.2 does anyone know how to get the SMB icon back on my screen so i can modify my themes and icon? Also is Customize coming out with a new version to work with 1.1.3. Help !
AS PER LESTER
I also had the same problem!
plus category 1.53 doesn’t work and wont install.
everything seeems to be working great except the gps feature in maps where it should display my current location doenst work and I live in canada so i suppose it should work … Anybody else have this problem?
I did this on my unlocked jailbroken 1.1.2 iphone with a t-mobile UK sim. My first attempt didn’t work as ibrikr created a 0k bin file rather than the 300mb one to upload to the phone. This was due to problems with vista so i had to run the program in compaibility mode for xp, and run as an admin. Make sure auto-lock is set to never on iphone as well.
The program then worked perfectly and after following the steps my phone booted into a unlocked jailbroken 1.1.3. The only problem is the locate feature in gmaps not working, and i had to reinstall all my apps in installer. My texts, mail settings, notes, music and some app settings all remained. I had to reenter my edge and wifi settings.
I am 1 day into the updae and I have had no problems at all. Works like a charm!!!!
ive dont this and i got back down because this has serious bugs in it….. EDGE settings is a real problem in this one…. sry guys it be better to wait for the real one
I am loving it. It has a couple of bugs but nothing that makes it not worth the update
Thanks Nate! it works perfectly for me, would be nice to have Customize and summerboard working, i guess an update is imminent!
I have unlocked Iphone with v1.1.1.this phone was unlocked in U.S but now using it in U.K on Orange network. have been using without problems for 4 months.now something happend yesterday and the iphone wont swith on.just apple symbol appears thats all .when i connect to windows computer it will ask me to restore…
i know if i restore to either v1.1.1 or v1.1.3 it will lock my phone…i may be wrong here??
can some one help me what are the options i have to get it back working iphone..?
any help is very much appriciated.
upgrading this way to 1.1.3 or downgrading from it will NOT relock your phone.. the baseband is untouched and the original unlock will remain…..unless you upgrade to a legit 1.1.3
Cheers Lumos and truehybridx, it took me ages to unlock my iphone at 1.1.2 and am sketchy about 1.1.3 but you guys have made it pretty clear its good to go!
Just a question though:
-do we need to uninstall ANY apps on a jailbroken/unlocked phone before starting the process? Or can we just do everything without priming the iphone before hand?
can some one anser my question please………..thanks
Martin, sounds like your phone is in restore mode.
You’ll have to reinstall 1.1.1, jailbreak and then sim-unlock it using anySIM.
This process will take about 45mins usually.
You can find a guide here:
https://limitededitioniphone.com/guide-jailbreakactivateunlock-virgin-iphones-v111-windows/
Mirsep,thanks for ur reply.
The Iphone could not be restored.An unknown error occurred(1604) .
i get the above error when i try to restore it with v1.1.1 firmware.
i have downloaded this 1.1.1 and then trying to restore it but i get this above error.any help is appriciated.thanks
i just upgrade my unlock iphone from 1.1.2 to 1.1.3 and everything work perfectly except the google map location. But i found out the solution for that. Here is the link for who has the issue like me.
http://lifehacker.com/349314/enable-faux+gps-feature-in-jailbroken-113-iphone
MARTIN
try to plug the usb in a difrent one if not go to a difrent pc an restore that work for me wend i hade the same problem
really simple upgrade..everything works fine here
So i guess it doesnt work for the i pod touch?
I’ve tried this with my touch but it says:
Checking iPhone version…
You have iPhone version .
Sorry! You must have an iPhone 1.1.1 or 1.1.2 with Installer.app installed. Press Enter to exit.â€
I have a 1.1.1 jailbreak ipod touch with installer