You may also need to take these steps if you get the message: Warning - Potential security breach!

Windows Users:

WinSCP Portable executable
Look for the file “winscp418.ini” located in you WinSCP directory.
Find [SshHostKeys].
Then look for the line that starts with rsa2@22:then has your current iPhone IP Address.
Delete that line and save.
Now try to log in again and accept the new key. You can follow the directions here: WINSCP GUIDE FOR IPHONE

WinSCP Installation package
BE VERY CAREFUL. READ AND REREAD BEFORE YOU DO ANYTHING. MESSING WITH THE REGISTRY CAN SCREW UP YOUR COMPUTER IF YOU DO SOMETHING WRONG
Click Start
Click Run
Type regedit and then hit return
Navigate to: [HKEY_CURRENT_USER\Software\Martin Prikryl\WinSCP 2\SshHostKeys]
Delete only the line that says: rsa2@22:your iPhone’s iP Address
Now try to log in again and accept the new key. You can follow the directions here: WINSCP GUIDE FOR IPHONE

Mac users having trouble with SSH:

Launch Terminal and type “open /Users/username/.ssh/known_hosts”
Then look for the line which has your current iPhone IP Address along with ssh-rsa and ends in “==”
Delete that line and save the file.
Now try to log in again and accept the new key.

If you need to edit or transfer files on the iPhone and you are using windows, WinSCP is the program you need.  Many people have asked me how to transfer files to the iPhone so I made an easy guide to follow bellow.  If you would like me to add anything or have questions please let me know.

First make sure you have ssh and bsd subsystem installed from installer. Next get WinSCP and find your iPhone’s ip by going to (on your iphone) settings > Wi-Fi > “Your selected WiFi” > Look under IP Address- Connect to your iPhone using WinSCP (user: root password: alpine) Change File Protocol to SCP

Just press login after your screen on WinScp

click on the “..” until you see root, then click on the applications folder and put your downloaded .app program inside by dragging and dropping.

To set file permissions(CHMOD) right click on the folder or file and select properties. Most of the time you will have to change the Octal to 0755. If you have any other questions please ask.

If you are having troubles with log in please read this: http://limitededitioniphone.com/guide-winscp-will-not-connect-network-error-connection-timed-out/