Limited Edition iPhone header image 2

iPhone 1.1.3 Jailbreak Released For Both Windows And Mac!

January 24th, 2008 · 66 Comments · Apple, Applications, iPhone, Mods


A Working Jailbreak for the 1.1.3 firmware is here but comes with a RISK! As all upgrades are risky, this one is doubly so. You may have to restore your iPhone using iTunes and start again if it fails. Make sure to backup first!

This jailbreak, like the 1.1.2 jailbreak, comes as an upgrade. This means you need to have a 1.1.1 or 1.1.2 jailbroken iPhone already, before you begin. Unlocked phones appear to remain unlocked and work properly after the update according to scattered reports.

MAC VERSION – Download the 1.1.3 package maker and open it, then run Run_This. Read carefully, press Enter when necessary, and the image will be uploaded to your phone.

Here’s how you do it:

– Start with a 1.1.1 or 1.1.2 jailbroken phone with installed.

– Plug in your phone via USB to your computer.

– Download, extract, and run iBrickr Special 1.1.3 jailbreak edition (ibrickr.exe in the archive).

– iBrickr will determine what firmware you are running on your phone and make sure you can run the update.

– iBrickr will then guide you through the process of obtaining and modifying the 1.1.3 firmware (make sure to read everything thoroughly).

– iBrickr will upload the new firmware image to your phone. Note that this only puts the file on your phone and does not modify it at all, yet.

– When iBrickr finishes (should take about 10 minutes), it will tell you to go to Installer and install the “1.1.3 soft upgrade” package. Do that.

– When the installer finishes (this should take another 10-15 minutes), your phone should reboot with a fresh activated 1.1.3 firmware.


66 Comments so far ↓

  • Paul

    Everything seems to work apart from the map won’t locate my postion and having trouple installing the new update for app tap installer just takes ages to download doesnt even get halfway and says package failed.

    Any ideas anyone?



  • Mirsep


    The only other thing I can think of is try combinations of holding down the power and home buttons.

    Hold both of them down for about 10 sec. (until something happens ).

    Then keep the home button pressed down while you connect to the pc. After another 10 sec the whole restore process should start again fresh.

    You should also try downloading another version of 1.1.1 just in case your version is a bit dodge.

    The main advice I’d give you after my experience is try different combinations of button pressing/holding and keep trying.

    I did exactly the same thing three or four times before it worked, no idea what the problem was!

    Good luck.

  • swissdude

    does this hack work on a jailbreaked ipod touch also ?

  • Paul

    can anyone help? I’m having trouble upgrading to the new app tapp installer. I upgraded to 1.1.3 and all was fine except for app tapp it takes ages for it to refresh sources and upgrade its self other apps sim to be fine could it be a server problem?



  • Joe Ten

    Hello All,

    Well I love to have things perfect so I decided to factory reset my phone and re-jailbreak it, installed 1.1.1 and then update to 1.1.3 and yes I was able to get everything to work very well considering this was my 3rd time doing it.

    I even got customize 1.21 to work.

    but as my luck has have it I still don’t have a 100% working phone.

    The only problem I am having is that I can’t get my ipod part of the Iphone to play any music.

    I can play video’s but no music the play button just freezes.




  • Paul

    Can anyone verify that their install app is working ok? Mine takes ages to refresh sources. Thought it was just my iphone but I tried my sisters too and excactly the same thing has happened.

  • beeweezel

    hey i just got through downgrading my iphone from 1.1.3 back to 1.1.1 because i didnt have a jailbroken 1.1.1 and all that went smoothly but after running the iBrickr special many times already, the installer app keeps telling me that my iphone is not ready to upgrade…ive already run iBrickr special about 5 times and reupgraded and redowngraded and nothing seems to work!
    please help!!!

  • swissdude

    hi I succesfully updated my iphone to 1.1.3 with installer app but there seems to be a few things not working like the location in maps doesent show where I am, my phone doesnt ring when someone calls me it just vibrates, my wi-fi connection doesn’t save I always have to reconnect to it after I push the sleep button, I hate the dock, etc. Anyway I realised I was better on firmware 1.1.2 and I’d like to downgrade back to it. Does anyone know where I could find a link to download firmware 1.1.2 for the iphone ??

  • Mirsep

    OK just updated, thanks a lot Nate!
    Only one problem and that’s with my EDGE settings. I’m unable to enter more than one line of settings before the phone kind of freezes and returns me back to the home screen.

    Anyone else encounter this problem?
    Anyone got a soltuion????

  • zach

    what if i dont have 1.1.1 jailbroken.. i cant go back

  • Limited Edition iPhone

    go to settings and reset all your network settings. Edge will then work.

  • A sims

    hi sorry if this is in wrong section ,ive got a version 1.1.2 uk phone unlocked on a payg simcard , over the last week when ive recieved calls the signal drops down to nothing and it says no service , so i leave phone and it normally starts working again( gets signal) but for last 2 days its not worked and said no service,every thing else works fine,, ive tried turnng it on and off ,forced shutdowns etc is this a software fault if so how do i fix, or is the phone broken????
    any help would be great

  • bryan

    please help me i upgrade my phone using itunes
    it is brickt i downgrade it to 1.1.1 but can not use wifi the wifi is gray so i can not unluck the dame thing or go on the internte on it .so can any one please help me

  • bryan

    ooh my phone upgrade whas 1.1.3

  • x99gripe

    I have just upgraded my iphone to 1.1.2 but installer does not seem to work now. I get the error “Package download failed: can not find hosr” Any help on this?

Leave a Comment